HappyJapan HCH Plus, Instruction Book

Page: 24 / 355

-SJ -18
3_A T124
3-8b
DRIVE MODE
4. Press .
At this time, a warning of A or B may be displayed.
A
When placing the center of the pattern in the
center of the embroidery area, it may not fit the
embroidery area.
B
The pattern does not fit into the embroidery area.
Return to step 2. and select a large frame.
Press
and the warning will disappear.
5. Press to return to Drive mode.
６
. Press if you want to start embroidering
without tracing.
At this time, the following warning may be
displayed.
The position of the current pattern does not fit
into the embroidery range, or there is not much
area.
Please select a large frame or change the
position of the pattern.
6-4, 7-B
Press and the warning will disappear.
Unable to start due to the design is
oversized or positioned out of the
embroidery area.
OK
The design is larger than the
embroidery area of the frame.
OK
Probably the design is larger than the
embroidery area of the frame.
Confirm the frame size.
OK
A
B
CAUTION
Warnings are not displayed when Sock
frame,
Special frame,
User-defined frame is
selected, or machine in QUEUE.