HappyJapan HCH Plus, Instruction Book

Page: 10 / 355

-SJ -12
1
2
3
Assemble machine unit
1. Insert the thread stand pin with wave washer on the thread stand by turning clockwise, Then insert
thread stand felt.
2. Put the thread stand on to the machine and insert the thread guide pillar.
(set nut knob nut into the thread guide pillar and 2 washers)
Turn the thread guide pillar clockwise with a 3 mm hexagonal driver until tight.
Turn the knob nut clockwise with a 3 mm hexagonal driver until tight.
3. Install the thread guide bracket with supplied screws (pan head screw M6 x 10 2 pcs).
2_3 V301
2-4
SETTING UP THE MACHINE
2