HappyJapan HCH Plus Instruction Book Download

Page: 119 / 355

-SJ -69

1. When the machine is stopped, press

2. Select “NEEDLE”.

3. Press

from right submenu.

4. Press

The color change data will be saved into memo-

ry.

12-6

NEEDLE BAR SELECTION

12_6 NB01

Color change data registration

You can import and apply color change data from saved patterns (Including color change stops)

to the current pattern. This function lets you apply the same color change data from other pat-

terns.

The color change data is limited to one and the color change numbers are limited to 250.

Color change number

Press to return to Menu mode.

Press to return to Drive mode.

Summary of Contents for HCH Plus




































































































































































































































































































































































Search results

Summary of Contents for HCH Plus

Reviews:

Related manuals for HCH Plus

Brands by name

Popular brands

HappyJapan HCH Plus, Instruction Book

Search results

Summary of Contents for HCH Plus

Reviews:

Related manuals for HCH Plus

Brands by name

Popular brands