HappyJapan HCH Plus, Instruction Book

Page: 210 / 355

-S3 -72
22-1b
i-CUSTOM
21_1 U70 1
Pointer (Option)
Turn on and off the laser pointer.
Jump
Turn on and off the Jump.
3-5
Low speed operation 3-5
Turn on and off the Low speed operation.
Position alignment by defining 2 points
Embroidery position is aligned by defining 2
points.
9-8
Convert 9-5
Rotate and mirror invert selected pattern data.
Width adjustment
This setting adjusts stitch width. 14-3
Preset (Offset)
This select the Offset position. 14-A
Read USB
Read embroidery data from USB flash drive.
Read PC
Read embroidery data from PC.
Task reservation
22-2b
It is possible to perform reading design and other
operations even while machine is embroidering.
Bobbin thread alarm
Alarm message will be displayed when the
remaining amount of bobbin thread becomes low.
9-Cb
Work save
Save
working design or read working design.
9-Ce
Stitch number forward ten
Move the frame forward or backward by ten stitch-
es step
In addition, “Key lock” function can be used by set-
ting. 15-2
When the key is pressed continuously, the “Key
lock” function is activated and the frame will move
continuously even the finger is released from the
key.
When you stop it, press
(Start/Stop button).
Searching pattern data
Searching of the pattern data stored in
the machine memory is available.
11-D