HappyJapan HCH Plus, Instruction Book

Page: 58 / 355

-HP -51
7-2
CAP FRAME (OPTION)
CAUTION: To prevent accidents.
The frame moves quickly.
Keep hands away from the frame.
7_2 V601
2. Press and press and hold .
The power switch is automatically turned “OFF”
and the machine is turned off.
3. Hold the arc guide by hand and the rail
bracket has to be faced downward, then
install into the bed as showing picture.
When you hold the cap drive frame assembly, be
sure to hold the arc guide of the cap drive frame
assembly.
If you hold the rail bracket, your fingers will be
pout between the rail bracket and the rail brack-
et rotary cylinder and rail bracket can get out of
place.
ON
OFF
Rail bracket
Arc guide
Rotary cylinder
1. Press and Press .
The embroidery frame will move to the center .
Installing and removing the cap drive frame
You need to install the cap drive frame into the carriage when you embroider a cap.
Please remove by reverse order of these step.
Shutting down...
ON If the power can not be turned
off automatically, turn off the
OFF power with the power switch.