HappyJapan HCH Plus Instruction Book Download Page 207

Page: 207 / 355

-DE -164

1. When the machine is stopped, press

2. Select

“SCREEN”.

3. Press

4. Press

Initialization is cancelled.

5. Press

The setting is fixed and display returns to MENU.

21-3

SCREEN SAVER

22_A UA01

Initialization of registered images in the machine

Screen saver images to set current status to initial status (factory setting).

Original images in 001 to 005 are restored although they are deleted.

All the images saved in 006 to 012 are deleted.

Press to return to Drive mode.

Summary of Contents for HCH Plus




































































































































































































































































































































































Search results

Summary of Contents for HCH Plus

Reviews:

Related manuals for HCH Plus

Brands by name

Popular brands

HappyJapan HCH Plus, Instruction Book

Search results

Summary of Contents for HCH Plus

Reviews:

Related manuals for HCH Plus

Brands by name

Popular brands