HappyJapan HCH Plus, Instruction Book

Page: 85 / 355

-DE -113
9-Cd
POSITION / BOBBIN CHANGE ALERT
16_2 U801
3. Remove the bobbin and check the
remaining amount.
When the remaining amount is suitable, it is
no need to correct the value.
Please continue embroidery.
The correction of setting value is required
when the remaining amount is overage or
shortage.
Go on to step 4.
4. Press “Frame forward”.
5. Press .
6. Press .
7. Reduce the setting vale when the bobbin is
almost empty.
Increase the setting vale when the
remaining amount is too much.
The total stitch number which is calculated after
the last bobbin exchange is displayed as “Current
value”.
Please refer the “Current value” to find suitable
setting.
8. Press and .
9. Press to return to Drive mode.
Please note that several corrections may be
required to find suitable setting.