HappyJapan HCH Plus Instruction Book Download Page 239

Page: 239 / 355

-HP -95

22-

THREAD SET

This function is used when the embroidery machine and Happy PMS (Production management

system) are connected with network.

It is not required to set when the Happy PMS is disconnected.Please refer to instruction book of

“Happy PMS” for more precise information.

21_4 TB01

1. When the machine is stopped, press

2. Press

when the standerd contorol

box.

The page of menu to changed.

3. Select “THREAD SET”.

Please refer the instruction manual of

“Happy

PMS"

4. Presss

Fix your setting and the display returns to MENU.

Summary of Contents for HCH Plus




































































































































































































































































































































































Search results

Summary of Contents for HCH Plus

Reviews:

Related manuals for HCH Plus

Brands by name

Popular brands

HappyJapan HCH Plus, Instruction Book

Search results

Summary of Contents for HCH Plus

Reviews:

Related manuals for HCH Plus

Brands by name

Popular brands