HanseLifter SDJ Series, Manual

Page: 32 / 251

Page 10 of 22
SDJ10 – Series Duplication, even in parts, is not permissible.
Technical data
1.1 Manufacturer (abbreviation) HanseLifter HanseLifter HanseLifter HanseLifter 1.1
1.2
Manufacturers type designation SDJ1012 SDJ1016 SDJ1025 SDJ1030
1.2
1.4 Operator type: hand, pedestrian, standing, seated, order-picker Hand Hand Hand Hand 1.4
1.5 Load capacity/rated load Q (t) 1.0 1.0 1.0 1.0 1.5
1.6 Load centre distance c (mm) 600 600 500 500 1.6
1.8 Load distance, centre of drive axle to fork x (mm) 730 730 730 730 1.8
1.9
Wheelbase
y (mm)
1280 1280 1280 1280
1.9
2.1 Service Weight kg 200 230 276 316 2.1
3.1 Tyres: solid rubber, superelastic, pneumatic, polyurethane polyurethane polyurethane polyurethane polyurethane 3.1
3.2
Tyre size, front 150x40 150x40 150x40 150x40
3.2
3.3 Tyre size, rear 83x60 83x60 83x60 83x60 3.3
3.5 Wheels, number front rear (x = driven wheels) 2/4 2/4 2/4 2/4 3.5
3.6
Tread, front b
10
(mm) 620 620 700 700
3.6
3.7 Tread, rear b
11
(mm) 385 385 385 385 3.7
4.2 Height, mast lowered
h
1
(mm)
1730 1980 1850 2090 4.2
4.3 Free lift h
2
(mm) 1085 1440 330 330 4.3
4.4
Lift h
3
(mm) 1110 1510 2410 2910
4.4
4.5 Height, mast extended h
4
(mm) 1750 2080 3000 3505 4.5
4.9 Height of tiller in drive position min./max. h
14
(mm) 500-1100 500-1100 500-1100 500-1100 4.9
4.15 Height, lowered h
13
(mm) 90 90 90 90 4.15
4.19
Overall length l
1
(mm) 1705 1705 1705 1705
4.19
4.20
Length to face of forks l
2
(mm) 555 555 555 555
4.20
4.21 Overall width b
1
(mm) 755 755 860 860 4.21
4.22
Fork dimensions
s/e/l (mm)
55/170/1150 55/170/1150 55/170/1150 55/170/1150
4.22
4.24 Fork-carriage width b
3
(mm) 565 565 565 565 4.24
4.25
Distance between fork arms b
5
(mm) 550 550 550 550
4.25
4.31
Ground clearance, laden, below mast m
1
(mm) 25 25 20 20
4.31
4.32 Ground clearance, centre of wheelbase m
2
(mm) 40 40 40 40 4.32
4.35 Turning radius WA (mm) 1400 1400 1400 1400 4.35
5.2 Lift speed, laden/unladen mm 20 20 20 20 5.2
5.10 Service brake manual manual manual manual 5.10
P
e
rf
o
rm
a
n
c
e
d
a
ta
D
is
ti
n
g
u
is
h
in
g
m
a
rk
W
e
ig
h
t
T
y
re
s
,
c
h
a
s
s
is
D
im
e
n
s
io
n
s
Table 1 Technical data
General use
The high-lift truck of the SDJ series is designed to transport and lift loads. Loads may be transported over short
distances and loads may be lifted up to the model-specific lifting height for storing in and removing from
shelves. The high-lift truck of the SDJ series is a platform floor truck that can be used in a versatile and reliable
manner.
Please always observe the load graph attached to the platform floor truck.
Intended use
Please use the platform floor truck only to transport goods respectively loads. The platform floor truck must only
be used in dry rooms with flat floors. Keep the platform floor truck away from moisture and wet conditions. If the
device made contact with rain for example, dry the platform floor truck immediately and grease all moving parts
at the designated grease nipples. Furthermore any contact with dust, sand, or other abrasive and aggressive
materials should be avoided. Please ensure that no belts or ropes get caught in the wheels.
Keep the platform floor truck away from aggressive and dirty environments.
When working, please observe that the floor has sufficient load-carrying ability.