HALYTECH
Illuminator User Manual
Page 10
Physical Connections
Antenna
Each Illuminator is supplied with a panel-mount “whip” antenna suitable for most applications.
Directional antennas with higher gains are available for fringe areas. Also available are Puck
style antennas designed to minimise vandalism.
Attach the antenna to the antenna connector located on the top of the Illuminator case.
Hand
tighten only.
Using tools to tighten antenna connectors may damage them, voiding the
warranty.
Power
Illuminator does not have an ON / OFF switch. The unit starts operating as soon as power is
applied.
The unit is fitted with two power connectors:
Charger – for connection of an external mains power supply
Battery – for connection of an optional external rechargeable battery
An Illuminator is normally powered by the supplied mains powered power supply (“plugpack”).
An external rechargeable battery can be also connected to provide back-up power in case of
mains power failures.
Simply connect the mains power supply to the “CHG” connector and the battery to the battery
connector socket – as shown in the illustrations above.
IMPORTANT NOTE:
You must observe the correct polarity when connecting the power supply and the battery.
