HALYTECH
Illuminator User Manual
Page 25
Save Setup to Disk
Once you have configured an Illuminator for your application you can save all the settings on
your computer. This is useful as a backup or if you have multiple Illuminators and you wish to
save a “template” that can be uploaded to other Illuminators with very similar settings. Then,
instead of entering all parameters from scratch you can simply edit the ones that need to be
changed.
To save the settings simply click on the “Save Setup to Disk” button. The computer will
prompt you whether to open or save the configuration. Choose “Save” and when prompted
enter the name of a file which will hold your settings.
Load Setup from Disk
Once you have saved system settings as described above, you can upload them to any other
Illuminator.
To load the settings click on the “Load Setup from Disk” link. The computer will prompt you to
enter the name of a file containing the settings. Enter the name of the file or select a file
anywhere on your computer by clicking on “Browse”.
NOTE: Loading settings from disk will overwrite your current settings.
Exiting Change Setup Mode
Logging, alarm activation, timers and timer overrides are all disabled while in the Change
Setup mode.
To exit Change Setup mode click “Exit Change Setup” button on the bottom of “Change
Setup” page.
This will immediately restart logging and alarm generation.
Setup change mode is automatically exited after 10 minutes of inactivity.
