HALYTECH
Illuminator User Manual
Page 38
Viewing Current Alarms
The current alarm states are displayed by clicking “Alarms” on the blue menu pane on the left.
All alarms are identified by their user-programmed names.
The display shows the state of all alarms at the time the page was displayed. The page
automatically updates every 10 seconds.
Active alarms provide additional information about the progress of the alarm sequence by
displaying a numerical code. Please refer to section “SMS Alarms” for the key to the code.
Resetting Alarms
Active alarms can be reset individually by contacting the Illuminator and clicking the particular
alarm.
ALL active alarms may be reset at once by clicking on the link at the bottom of the main pane.
If there are no active alarms, the command will be ignored.
Alarms may also be reset by sending an SMS the Illuminator. Please refer to the section
“SMS Commands” for details.
