HAKO Citymaster 650, Operating Manual

Page: 54 / 190

54
02-147015-00-00.fm
Use
Switching the hazard warning system on and off
The hazard warning system is switched on and off with the switch
Fig. 36-62 . The direction indicators Fig. 4-3 and Fig. 5-17 flash. The haz-
ard warning system also functions in position P of the ignition switch.
•
Switch in stage I: Hazard warning system OFF
•
Switch in stage II: Hazard warning system ON
The lamps are monitored. Fast flashing signals a defective lamp.
The warning light information symbol
Fig. 36-C appears in the multifunc-
tion display.
Direction indicators
The direction indicators Fig. 4-3 and Fig. 5-17 are switched on and off
with the switch Fig. 36-66 . The direction indicators also function in posi-
tion P of the ignition switch.
•
Switch in stage I: Left direction indicator switch ON
•
Switch in stage II: Direction indicator switch OFF
•
Switch in stage III: Right direction indicator switch ON
The lamps are monitored. Fast flashing signals a defective lamp.
In the multifunction display, the flasher information symbol
Fig. 36-A
appears, or in trailer operation the trailer operation flasher information
symbol Fig. 36-B .
Cruise control and speed limiter (optional)
Cruise control and speed limiter are available only in work mode. The cur-
rent speed is set in the first position of the switch Fig. 37-A . In this case,
the road speed is controlled so that it is not lower or higher than the speed
set with the cruise control (between 1.5 and 12.5 km/h). The cruise control
information symbol Fig. 37-B appears in the multifunction display. If the
driver presses the accelerator pedal, the road speed is increased without
the cruise control being deactivated. After releasing the accelerator pedal,
the cruise control returns to the set speed.
Cruise control can be terminated by operating the brake, the reverse
pedal, the Hako button and with the tip switch in neutral.
The speed limiter determines the maximum road speed with the accelera-
tor pedal pushed down fully. This serves for convenient control of the road
speed especially at low working speeds. The speed must be set on the
configuration menu, see page 44. It is activated/deactivated via the sec-
ond switch position of the switch Fig. 37-A .
Fig. 36:
A
B
66
62
C
Fig. 37:
A
B
Danger
Risk of accident! Use the cruise control and the speed limiter
only when the traffic situation allows!