HAKO Citymaster 650, Operating Manual

Page: 178 / 190

178
06-147015-00-00.fm
Attachments and Options
Mounting the spreader
1. Place the vehicle on a level surface and hold it with the parking brake.
Switch the engine off and pull out the ignition key.
2. Move the spreader with mounting wagon carefully to the tail of the vehi-
cle and align it.
3. Make the connections.
• Spreader roller hydraulic motor – supply Fig. 193-B
• Spreader roller hydraulic motor – return Fig. 193-E
• Spreading disk hydraulic motor – supply Fig. 193-C
• Spreading disk hydraulic motor – return Fig. 193-D
• X65 – 7-pin socket for lighting Fig. 193-G
• X67 – 7-pin socket for spreader Fig. 193-H
• X68 – 7-pin socket for spreader Fig. 193-I
4. With both cranks Fig. 193-J of the trolley lower the spreader evenly
onto the holding points Fig. 193-F of the vehicle tail end and secure
with bolts.
5. Remove the trolley.
Dismantling is in the reverse order.
An optional control cable is required for the socket X68.
The optional odometer is required for the distance-dependent spreading
function.
Fig. 193:
D B C
E
F
G
J
I
H
F