HAKO Citymaster 650, Operating Manual

Page: 81 / 190

03-147015-00-00.fm
81
Operation
Checking the hydraulic oil level
Check the hydraulic oil level with the level indicator Fig. 77-A , if necessary
top up hydraulic oil. To do this, open the cap Fig. 77-B . Filling volume, see
Technical data on page 99.
If the warning symbol
Fig. 77-C/D appears, there is a risk of hydraulic sys-
tem operating failure. Immediately switch the engine off and check the
hydraulic oil level.
Checking the coolant level
The coolant level of the expansion tank Fig. 78-A is also visible from the
open service door on the right-hand side and must be between the upper
and lower mark Fig. 78-B .
Top up the coolant if necessary. To do this, open the cap Fig. 78-C . Filling
volume, see Technical data on page 99.
If the warning symbol
Fig. 78-D appears, there is a risk of engine damage.
Immediately switch the engine off and check the coolant level.
Checking the tyre pressure
Remove the valve cap Fig. 79-A and adjust the tyre pressure with a com-
pressed air unit, see Technical data on page 99.
Fig. 77:
A
B
C
D
Danger
There is a risk of burns and scalds! Caution when handling
hot operating and auxiliary materials.
Fig. 78:
A
C
D
A
B
Danger
There is a risk of burns and scalds! Caution when handling
hot operating and auxiliary materials.
Fig. 79:
A