HAKO Citymaster 650, Operating Manual

Page: 53 / 190

02-147015-00-00.fm
53
Use
2.3 Controls in the driver's cab
2.3.1 Steering column control panel
Adjusting the steering column
The steering column Fig. 34 - 33 can be adjusted to the corresponding
driver position with a lever.
•
Turn the lever Fig. 34-A counter-clockwise until the steering column is
unlocked.
•
Set the required steering column adjustment.
•
Turn the lever clockwise until the steering column is locked.
Check that the steering column is locked. To do this move the steering
wheel Fig. 34-28 in the longitudinal direction.
Setting the fixed engine speed
The fixed engine speed is set with the switch Fig. 35-64 . In this case the
hydraulic circuit for the front and rear attachments is changed. Set the
speed according to the requirements.
The overview illustrates that sufficient power is available already in the
ECO mode for many applications.
The full hydraulic output is reached as from the Standard speed.
Additional energy is available in the driving mode as well as in hydraulic
circuit II at Maximum. Set the speed according to the requirements.
Operation primarily in the ECO mode lowers consumption and noise.
Horn
The horn is switched on and off with the button Fig. 35-66 .
•
Push the button: Horn ON
•
Release the button: Horn OFF
Danger
Risk of accident! If the steering column Fig. 34 - 33 is unlocked while driving, it can come unexpect-
edly out of adjustment. You can then lose control over the vehicle.
Fig. 34:
A
33
28
Fig. 35:
64
66
Stage rpm Front attachment: l/min Rear attachment: l/min
1 – ECO 1900 25 19
2 – Standard 2250 29 22
3 – Maximum 2630 35 27