HAKO Citymaster 650, Operating Manual

Page: 155 / 190

06-147015-00-00.fm
155
Attachments and Options
6.2.1 Labels on the unit
Hako logo
The Hako logo Fig. 164-A is located on the mower cover.
Type plate
The type plate Fig. 164-B is located on the right side of the mower.
Label – Read operating manual
The Read operating manual label Fig. 164-C is located on the right side of
the mower.
Rotating parts label
The Rotating parts label Fig. 164-D is located on the right side of the
mower.
Keep distance label
The Keep distance label Fig. 164-E is located on the right side of the
mower.
Spring length label
The Spring length label Fig. 164-F is located on the right side of the
mower under the cover.
Transport and work position
The Transport and work position label Fig. 164-G is located on the left
side of the mower under the cover.
6.2.2 Mowing system safety instructions
Warning
•
You must consult Hako before attaching other attachments not approved by Hako!
•
The labels attached to the vehicle provide important information for safe operation. Renew labels
that are no longer legible or present.
•
Spare parts must be original spare parts to guarantee safety.
•
Always wear protective gloves when changing blades! There is a risk of injury!
•
Immediately renew damaged or highly unbalanced mowing blades to avoid damage to the blade
bearings.
•
Before reinstalling, balance the blades and check them for out of true in height.
•
Adopt measures against erroneous starting and unwanted movement. Pull out the ignition key.
•
The safety regulations for the Citymaster 650 must be complied with absolutely.
•
The V-belt is self-tensioning by spring force. Do not hook tension springs in or out with your bare
hand. Risk of crushing!
•
The lawn mowing system may be operated only in connection with the Citymaster 650.
•
The lawn mowing system may be put into operation only with the suction nozzle raised! Refer to
mounting the mower on page 156!