86
03-147015-00-00.fm
Operation
Activating work mode
Use the Hako button
to change over from transport mode to
work mode.
The accelerator pedals must be in the neutral position.
The work mode with front tool carrier information symbol
appears in the multifunction display.
The driving speed in the work mode is 0 to 25 km/h.
Setting engine fixed speed for attachments/options
The engine speed for attachments or options is set with the switch
. Set the speed according to the requirements.
Activating the front tool carrier
The front tool carrier is activated with the joystick
. The following
functions are possible for a vehicle without attachment:
•
Raising front tool carrier
•
Lowering front tool carrier (floating position)
The function of the joystick with an attachment is described in chapter 6.
Raising the front tool carrier is interrupted if the driver leaves the driver's
seat.
Fig. 87:
A
Fig. 88:
A
Stage
rpm
Front attachment: l/min Rear attachment: l/min
1 – ECO
1900
25
19
2 – Standard 2250
29
22
3 – Maximum 2630
35
27
Fig. 89:
Summary of Contents for Citymaster 650
