HAKO Citymaster 650 Operating Manual Download Page 182

Page: 182 / 190

182

06-147015-00-00.fm

Attachments and Options

6.4.5

Technical data

You will find information on technical data in the operating manual of the

spreader.

6.4.6

Maintenance

You will find information about the maintenance plan and maintenance

work in the operating manual of the snow blade.

6.4.7

Accessories

Your authorised Hako dealer is available to you at any time to answer

questions on accessories for the transport system.

Snow blade

Unit

Working width

1350

Share height

450

Loading platform

Unit

Load on the loading platform (bulk goods) with attached spreader

max. 150

Load on the loading platform (bulk goods) with not attached spreader

max. 400

Load on the loading platform (piece goods) with not attached spreader

max. 100

Summary of Contents for Citymaster 650































































































































































































Search results

Summary of Contents for Citymaster 650

Reviews:

Brands by name

Popular brands

HAKO Citymaster 650, Operating Manual

Search results

Summary of Contents for Citymaster 650

Reviews:

Brands by name

Popular brands