6LE007317A
8
1
2
Screw Tightening torque
PH1 / 0.2 Nm
Insert the 4 door
mounting screws
in the designated
slot and push
back to lock in
place.
Example of cable way
6,4
R 6,25
3
39
±0,3
22,05
15,5
±0,5
135
°
2
8
±0,1
STEP 2: Fixing the controller on the door:
Place the ATS controller inside the door cut-out and clip the door mounting screws into the side of the
controller (2 screws on each side). It is important to respect the tightening torque indicated below and
follow good engineering practise when installing the ATS controller.
7.2.2. Backplate mounting
STEP 1: Placing the 4 mounting legs on the controller
Insert the mounting legs into the 4 slots (2 top side and 2 bottom side (cf below top side view).