hager HZI855 Instruction Manual Download Page 28 | Manualshive

Page: 28 / 65

hager HZI855 Instruction Manual Download Page 28

6LE007317A

28

ALARM LOG:

the log can store up to 100 alarms or faults, even if they are in 2 different menus to make it simpler to the user. Inside alarm

log screen, there are 2 options: in progress and history. “In progress” shows all active alarms and the history shows all the last finalized

alarms.

HZI855

For each alarm, unlike with the events, the details are available, permitting the user to see:
• Type of alarm
• Status
• Starting time and date
• Duration of the alarm active (counter running for active alarms)
• Criticality of the alarm
• To learn about alarm configuration and options (see chapter 11.1.6).

HZI855

HZI855

FAULTS:

100 registers of faults and alarms can be stored inside the internal memory and they are divided into “in progress” and

“history”. Faults, however, permit also resetting faults using the option “PRESS OK TO RESET FAULTS” and confirming on the pop-up

that appears on screen.

HZI855

HZI855

Faults, to the contrary of alarms, have no detail of each register. On the history log, the information is the fault description and the time

& date when it occurred.

HZI855

«
...
26
27
28
29
30
...
»

Summary of Contents for HZI855


































































Reviews:

No comments