hager HZI855 Instruction Manual Download Page 15 | Manualshive

Page: 15 / 65

hager HZI855 Instruction Manual Download Page 15

6LE007317A

15

8. First power up - Smart Wizard

Once the controller is connected to the switch with the cable harness, as soon as the controller is

powered up, it will automatically start in MANUAL mode and, in order to facilitate the commissioning, a

smart wizard will appear to drive the user through the main configuration parameters.

The first out of 8 questions will be the language. User can choose between the following 9 languages:
• English
• French
• German
• Italian
• Polish
• Spanish
• Turkish
• Chinese
• Portuguese

Then it will follow the option to start the wizard with the following options:
• Start now
• Remind me the next power on
• Never ask me again

The wizard will always be accessible anyway inside the menu PARAMETERS/WIZARD in case it is missed

the first time.

In case the decision taken is to begin with the wizard configuration, then the options are:
• To use the smart configuration: parameters like voltage, frequency and phase rotation will be auto

detected and proposed to the user.

• To use the manual configuration: the user needs to enter the values manually.

The controller will require the configurator 4-digit password before the configuration (by default, 1000).

LANGUAGE

DATE AND TIME

SOURCES

INSTALLATION

PRODUCT

NAME

COMMUNICATION

RS485

«
...
13
14
15
16
17
...
»

Summary of Contents for HZI855


































































Reviews:

No comments