hager HZI855 Instruction Manual Download Page 20 | Manualshive

Page: 20 / 65

hager HZI855 Instruction Manual Download Page 20

6LE007317A

20

TIMERS:

Allows the user to visualize the status of the timers.

RUN: Shows all the ongoing timers, and allows the user to bypass the timers
S1: Shows all timers linked to source 1
S2: Shows all timers linked to source 2
OPT: Shows all optional timers

ALARMS:

Allows the user to visualize active and finalized alarms. It also has a shortcut by pressing OK to go to the Alarms menu and

clear alarms (password protected: operator).

ACT: Shows all active alarms, and allows the user to direct access to the alarm menu.

FIN: Shows all finalized alarms that are not acknowledged by the user.

In this screen, a direct access to the alarm log is available by pressing “down arrow” + “ok”, which will select the GO TO ALARM access in

the left bottom of the screen. See more information about the alarm LOG in chapter 10.7.

I/O:

Allows the user to visualize the configuration of the I/O. The settings for the inputs and outputs on the controller will be shown.

IN: Controller inputs.
OUT: Controller outputs.

«
...
18
19
20
21
22
...
»

Summary of Contents for HZI855


































































Reviews:

No comments