manualshive.com logo in svg

hager HZI855, Instruction Manual, Page: 37 / 65

Share
Download
hager HZI855 Instruction Manual Download Page 37

6LE007317A

37

11.1.2. DISPLAY parameters menu

The PARAMETERS / DISPLAY menu allows to set the main parameters for the HMI.

SCREEN PARAMETERS:

Languages available: 
• English
• French
• Spanish
• Italian
• Chinese
• Turkish
• Portuguese
• German
• Polish

“Timeout” sets the time in seconds where the screen will remain on after touching a button.

DATE AND TIME PARAMETERS:

HZI855

Date and time will remain running thanks to the RTC battery even if all sources are off.

OPTIONS for the HMI buttons:

HZI855

•  TEST button use (between ON LOAD or OFF LOAD test)
•  LAMP TEST DURATION (s): This will allow the user to change the duration of the lamp test button "insert lamp test button" available 

on the HMI. The lamp test will start after the button is pressed and the user can end the lamp test at any time by pressing the button 

again before this time limit.

CHANGE PRODUCT NAME:

 allows changing the name of the ATS. This information will appear on all the dashboards and menus on 

the top-right of the screen.

Summary of Contents for HZI855


































































Reviews:

No comments