H2flow ProcessDefender, Instruction Manual

Page: 35 / 41

H2flow Controls ProcessDefender™
69
Parameter List H2flow Controls ProcessDefender™
68
Parameter List
Display I.D. Function Display Text Range Default Symbol
8.2.0 HMI Firmware “HMI.INF”
8.2.1 Displays HMI firmware REV “R19”
8.2.2 Displays HMI COMMS API REV “4”
9.0.0 Upgrade “UPGRAD”
EXIT EXIT EXIT Exit screen “EXIT”
Max level reached
“MAIN R1” / ”MAX”, “PRE R2” / ”MAX”,
“GEN R3”/”MAX”
Min level reached
“MAIN R1” / “MIN”, “PRE R2” / “MIN”,
“GEN R3” / “MIN”
Latch reset of alarms has been activated by holding the down button for 3
seconds
“LAT.RES”
Out of range (This message only appears with actual load and actual current) “O O R”
If a communications error occurs with the sensor “C Err”
Over voltage on sensor input
Top digits: “VOLT”, Bottom digits:
“OVER”
Over current on sensor CT inputs
Top Digits: “AMP”, Bottom digits:
“OVER”
Sensor USB plugged in “SEN.USB”
HMI and sensor firmware incompatible “API ERR”