H2flow Controls
ProcessDefender™
63
Parameter List
H2flow Controls
ProcessDefender™
62
Parameter List
Display I.D.
Function
Display Text
Range
Default
Symbol
2.6.0
Number of phases
“PHASES”
2.6.1
Configure number of phases
“1” or “3”
“1” or “3”
3
2.7.0
Default value
“DEF.VAL”
2.7.1
Default parameter, “main alarm”, “pre alarm” and “display measurement”
“PCT”, “KW”, “HP”
“PCT”
2.7.2
Auto scroll of values
“YES/NO”
“NO”
2.8.0
Motor operating voltage
“M VOLT”
2.8.1
Configure operating voltage
0-600
380
V
2.9.0
Event log time and date
“TIME”
2.9.1
Event log time. Hour.Minutes.Seconds
“TIME”
0-24 hour, 0-59 minutes,
0-60 seconds
2.9.2
Event log date. Year.month.day
“DATE”
0-99 years, 0-12 months,
1 - day limit for month
3.0.0
Main alarm, relay 1.
“MAIN.R1”
3.1.0
Main alarm settings
“M SET”
3.1.1
“OVER”, “UNDER”, “BOTH” or “OFF”
“OVER”
3.1.2
Configure max trigger point, as percent of motor rated input power. (Only
show selected monitor source)
“MAX M”
0-150
125
%
Configure max trigger point, as measured input power in KW. (Only show
selected monitor source)
0.0-745.0
0
kW
Configure max trigger point, as percent of motor rated input power. (Only
show selected monitor source)
0-999
0
HP
3.1.3
Configure min trigger point, as percent of motor rated input power. (Only
show selected monitor source)
“MIN M)
0-150
0
%
Configure min trigger point, as measured input power in KW. (Only show
selected monitor source)
0-745
0
kW
Configure min trigger point, as measured input power HP. (Only show
selected monitor source)
0-20
0
HP
3.2.0
Response delay
“RES.DEL”
3.2.1
Configure response delay overload
“OVER”
0.5-255
0.5
S
3.2.2
Configure response delay underload
“UNDER”
0.5-255
0.5
S
3.3.0
Relay 1 latch
“R1 LAT”
3.3.1
Configure relay 1 Latch reset
“ON” or “OFF”
“ON”
3.3.2
Configure relay 1 hysteresis %
0-50
0
%
