H2fl ow Controls
ProcessDefender™
21
Programming
H2fl ow Controls
ProcessDefender™
20
Programming
⊲
Menu 2.2.1 - Unit of Measurement
Depending on where you are in the world, you may prefer to program the PD100 in
HP (horsepower) or kW (Kilowatts). The option chosen will determine the unit of
measurement for programming the motor’s size and how its load is displayed.
Fig.2.2
Fig.2.3
To leave menu 2.1.0, press
to enter the Motor Screen (2.2.0) followed by
to
enter its sub-menu 2.2.1.
Now press the
or
button to select your preferred unit of measurement for
programming the motor details - the options are HP (Horsepower) or kW (Kilowatt).
Press
to confi rm your selection. The screen will show ‘SAVED’ for two seconds
and then automatically move to menu 2.2.2.
⊲
Menu 2.2.2 - Motor Rated Power (HP or kW determined by 2.2.1)
Here you will program the motor’s rated HP or kW (depending on your selection in
2.2.1).
Fig.2.4
If you arrived at menu 2.2.0, press the
button to enter the sub-menu 2.2.1.
In the top-left -side of the display, you will now see four digits which will allow you to
enter a motor size up to 999.9 HP (or Kilowatts). Let us assume that your motor size is
15 HP. To enter a value , you will automatically start with the left -hand digit. For this
example, we want to:
1.
Leave the fi rst digit as ‘0’, so press
.
2.
You will now program the second digit from the left to ‘1’ by pressing the
button followed by the
button.
3.
You will now program the third digit from the left to a ‘5’ by pressing the
button fi ve times to display the number ‘5’ and then press
to accept.
4.
For this example, you should leave the fi rst digit aft er the decimal point as a ‘0’
and press
to confi rm.
The display will show ‘SAVED’ for 2 seconds and automatically move to menu 2.3.1.
