H2fl ow Controls
ProcessDefender™
41
Programming
H2fl ow Controls
ProcessDefender™
40
Programming
Fig.5.3
Fig.5.4
Important Note:
The parameter that was entered into menu 2.7.1 (%, kW or HP), will
be used to determined whether 4.1.2 and / or 4.1.3 will be set as a %, kW, or HP.
From Menu 3.0.0, press the
button to proceed to 4.0.0. Press the
button to
proceed to 4.1.0.
⊲
Menu 4.1.1 - Pre-Alarm Relay (R2) function
In Menu 4.1.1 we will confi gure what we want the Pre-Alarm Relay, R2 to protect
against: either Pre-Alarm for Process Overload, Underload, or both Overload and
Underload. To program your required function, press the
button to proceed to
Menu 4.1.1. The display will now appear as seen in Fig.5.5 (below-left ).
If you require Pre-Alarm for Overload, simply press the
button.
If you require the PD100 to provide a Pre-Alarm for Underload or both Overload and
Underload, press the
button to display the screen shown in either Fig.5.6 (below-
center) or Fig.5.7 (below-right). Now press the
button to save your programmed
parameter. The word ‘SAVED’ will appear for two-seconds and the screen will
proceed to 4.1.2.
Fig.5.5
Fig.5.6
Fig.5.7
