K-BUS
®
KNX/EIB
Dimming Actuators
49
Parameter “If output on : receipt of “brightness value=0”output switch”
This function defines it is available or not to switch off the output by the defined brightness vale “0”.Options:
Off
To low threshold value
The option “Off” means the output is 0 when the brightness value is 0.The option “To low threshold value”
means the output is the low threshold when the value is 0.
Parameter “On receipt “brightness value”>=1 output switch on”
This function defines it is available or not to switch on the output by brightness dimming mode when the
output is 0.Options:
No
Yes
The option “No” means the dimmer remains the output “0” when receiving the message of 100 if the output
is 0. The option “Yes” means the output is the input brightness value when the receiving value is greater or equals
to 1; if the input brightness value is smaller than the brightness low threshold, the output is the brightness low
threshold.
5.4.3 Parameter window “X: scene page”
Fig. 5.6 parameter window “X: scene page”
This parameter shown in Fig. 5.6 defines the scene function, totally 15 scenes from 1 to 15. It is able to set 15
scenes simultaneously and call any one of them by control panel when needed.
Parameter “Scene function is”
The function defines the enable or disable of the scene function. Options:
Enable
Disable
The option “Enable” means it is able to use the scene function of the dimmer X; the window shown in Fig.
5.6 will be displayed after selecting. If there is no need to use the function of scene, so select “Disable” option.
