K-BUS
®
KNX/EIB
Dimming Actuators
57
6.4. Preset Value communication object
Fig.6.4 Preset value function communication object
No.
Function
Object name
Data type
Flag
DPT
7
X preset 1
OUTPUT X
1bit
W,C
1.022 scene
It is the communication object of preset 1 and call the preset value. When the object receives the logical
value of “0”, the brightness value of dimming is defined by “Brightness value at obj=0”; when the object
receives the logical value of “1”, the brightness value of dimming are defined by “Brightness value at obj=1”.
This object will be started after activating preset1.
8
Set preset 1
OUTPUT X
1bit
W,C
1.022 scene
This object is used to modify brightness value of preset1. It will start the parameter “preset1 can be set via
the bus” with “Enable”. Via this object can save current brightness status as new preset value. It will save the
current brightness value to “brightness value at obj=0” with “0”, that is to replace the is value;
It will save the
current brightness value to “brightness value at obj=1” with “1”, that is to replace the is value.
9
X preset 2
OUTPUT X
1bit
W,C
1.022 scene
It is the communication object of preset 2 and calls the preset value. When the object receives the logical
value of “0”, the brightness value of dimming are defined by “Brightness value at obj=0”; when the object
receives the logical value of “1”, the brightness value of dimming is defined by “Brightness value at obj=1”.
This object will be started after activating preset 2.
10
Set preset 2
OUTPUT X
1bit
W,C
1.022 scene
This object is used to modify brightness value of preset 2. It will start the parameter “preset 2 can be set via
the bus” with “Enable”. Via this object can save current brightness status as new preset value. It will save the
current brightness value to “brightness value at obj=0” with “0”, that is to replace the is value;
It will save the
current brightness value to “brightness value at obj=1” with “1”, that is to replace the is value.
Table 6.4 Preset value function communication object
