K-BUS
®
KNX/EIB
Dimming Actuators
7
1.2. Dimming Controller, 4fold, 0~10V
0~10V DC control device with standard DC 0-10V control interface, can be connected with electronic
dimming ballast/EVG or other devices with 0-10V interface to control the lights, such as dimming, scenes,
switching and so on.
The 0-10V DC control device has embedded switching relays for 23 ECG/18W, 14 ECG/36W, 11 ECG/58W
or23 ECG-T5/24W. Each channel offers control voltage up to 23 electronic control gears (ECG).
The devices adopt screw terminals to achieve electrical connection; the connection to the KNX bus is
established via a bus connecting terminal. The input need connect a 230V AC operation voltage. The following
list provides a functional overview:
◆
Switching the light
◆
Relative dimming
◆
Absolute dimming
◆
Status report
◆
Setting 15 scenes
◆
Staircase lighting function
◆
Preset value and modify preset value functions
The above function of parameters to configure and use are described in the chapter 5, the database file (.vd4)
of the device is the same with KA/D0403.1. But there is not the error report function for the device, and in the
normal mode, there is not reset function after bus voltage recovery, i.e. the brightness status will not restore the
last brightness value.
Note: Some lights cannot be turned off completely by dimming. In this case, you can turn off the lights
via switching.
