K-BUS
®
KNX/EIB
Dimming Actuators
43
Parameter “Channel function”
Options:
Actived
Deactive
The window shown in Fig. 5.3 will pop out when choosing “Actived”. In this window, it is able to set the
working mode, the current brightness status and the switch status report. It will become null with “Deacitve”
selection.
Fig. 5.3 Parameter window “CH X general”
Parameter “Staircase lighting”
Options:
Actived
Deactive
It is in the status of staircase lighting control with “Actived” and in the normal dimming control with
“Deactive”.
Parameter “Brightness value OBJ transmit after dimming”
This function is used to report the latest brightness value. When enable this function, it will send a frame to
the BUS no matter what happen to make the brightness value changed. Options:
Nothing
Transmit new brightness
It will not send any report of the current brightness value with “Nothing”. And send a frame to the BUS to
report the current brightness value no matter what happens to make the brightness value changed with “Transmit
new brightness”.
