K-BUS
®
KNX/EIB
Dimming Actuators
50
Parameter “Scene select”
This function is used to select a scene to set the brightness value, dimming time and dimming mode. Options:
Scene 1
Scene 2
……
Scene 15
The setting parameters for the other 15 scenes are shown as below:
Parameter “Reaction on receipt scene Y”
The function defines the dimming mode of the set scene. Y means the scene that needs setting, 1~15. The Y
shown as below has the same meaning. Options:
Dimming on
Switch on softly
The option “Dimming on” means the set scene dimming time is the set time of the parameter “Scene Y
duration (time=entry*2s)”: the input time multiplies 2. The option “Switch on softly” means the scene dimming
time is the default time “4S”.
Parameter “Scene Y duration
（
time=entry*2 S
）
”
This function defines the dimming time of the set scene, which is the input value multiplies 2s; the maximum
input time is 255s.
Parameter “Scene Y brightness value
（
0%~100%
）
”
This function defines the brightness value of the set scene, with range from 1% to 100%.
Parameter “Assignment to Scene number 1…64”
This function distributes the scene number of the set scene that means the communication object “Scene/save
X” will call the scene by the allocated scene number. Options:
Not assignment
Assignment to scene 1
Assignment to scene 2
……
Assignment to scene 64
Note: the parameter setting option is 1~64 scene number or unallocated.
