K-BUS
®
KNX/EIB
Dimming Actuators
40
Chapter 5 Parameters Setting Description in the ETS
5.1. Introduction
2 operation modes (main function) per output:
Normal Dimming
This mode is mainly used to control the normal luminaries system, which can set the output time and the
brightness value of the dimmer, dim UP or DOWN with the function of “relative dimming”, and also call the set
brightness values from the scene function, until dim to the required environment.
Staircase Lighting
The mode is mainly used to control the staircase luminaries. Switch ON the staircase luminaries and switch
OFF automatically after a certain period, or switch OFF by manually.
5.2. Parameter window “Device general”
The parameter settings may have difference for different devices. If the device has not the follow parameters,
it will have not the function of the parameter.
Fig. 5.1 Parameter window “Device general”
Parameter “Telegram rate”
This command is used to set the frame speed. Options:
No limit
Delay 100ms
Delay 200ms
……
Delay 700ms
In this system the function of frame speed is unavailable.
