Guldmann GH2, Installation Manual

Page: 65 / 109

A
D
B
E
C
©
Guldmann
GB
-1394/11/08
6
4.
e
le
ct
rI
ca
l
co
n
n
ec
tI
o
n
Combi-lock
CL manual
Comprises:
• a safety lock for fixed rail
• a safety lock for traverse rail
• manual changeover mechanism
The Combi-lock is used at the transition between a room-
covering rail system and a single-track rail system to pro-
vide optimum safety when the two rail systems are used
together .
The function of the Combi-lock:
Engagement: A tongue is inserted to link the traverse rail
with the fixed rail, and the safety locks open .
It is now possible to run the hoist from a fixed rail to a tra-
verse rail and vice versa .
Disengagement: The tongue that links the systems is
drawn back, and the safety locks close .
The traverse rail is released, but the safety locks prevent
the hoist from running out of the rail systems .
Safety locks must always be installed on the fixed rail and
on the traverse rail . The combination of these and the
travelling mechanism (powered or manual) is collectively
designated the Combi-lock .
A . The manual changeover mechanism must be installed
on the bracket of the Combi-lock .
B . The Combi-lock bracket is always supplied with the
safety lock for fixed rail and must always be used
together with a standard ceiling bracket or any extended
ceiling bracket .
C . Cord pull, open/close .
D . Ceiling bracket, use the bracket as a drill gauge . For
service and maintenance considerations it is best to use
at least 5 mm (
1
/
4
") spacers beneath both fittings for
permanent and parallel rails above the Combi-Lock .
E . Mini rail .