Guldmann GH2, Installation Manual

Page: 70 / 109

max 2
mm
©
Guldmann
GB
-1394/11/08
2
4.
e
le
ct
rI
ca
l
co
n
n
ec
tI
o
n
Combi-locks CL
Double electrical
Mounting of double Combi-lock
Remove side and end covers and the motor plate .
The small fixing plate appears, which is pushed into
the rail together with the tongues .
When the length of the rail and tongues are to be adapted,
it is important that the tongues stop max . 0 .5mm/ 1/16”
before the rail end .
The tongue must be able to move freely and easily in the
rail track .
The two plastic parts on the tongues must “overlap” as
illustrated . Insert the two pins underneath the motor plate
in the holes of the plastic parts . Now move the Combi-lock
forward and backward in the rail until the correct position
has been found . Remove the motor plate again and mount
the safety locks before fastening the fixing plate with the
screws as illustrated with the arrows .
Now mount the motor plate again on the fixing plate and
connect the wires according to the wiring diagram of the
Combi-lock . Finally mount the side covers .