Guldmann GH2, Installation Manual

Page: 49 / 109

©
Guldmann
GB
-1394/11/08
1
3.
I
n
st
al
la
tI
o
n
wall fitting
Wall types: Lightweight walls
Bracket types: GH wall stud brackets
• Examine the make-up of the wall .
• Mark and measure the spots where the wall stud is
to be fitted . Use laser equipment to determine height
placement so that the rail system is completely level .
• GH wall stud brackets are cut to appropriate lengths .
• The adapter around the skirting board is cut to shape
and to accommodate any installation panels .
• Note that wall studs can be used both as end-hung and
as centre supports for rails .
• Wall studs are assembled with base and top brackets
and are fixed to the wall through the pre-drilled holes in
the wall studs .
• A GH wall stud can be fixed with e .g . Fischer 5 x 52 S,
depending on the make-up of the wall .
• Ensure that the wall post is vertical
• The rails are mounted on the top bracket of the wall
stud . A clamp is placed either at the bottom or the top
of the rail .
• the clamp is led through the oval hole at the base/top
of the top fitting, and fit with a facet disc and lock nut
against the top fittings .
• When the rails have been fitted to the top brackets,
tighten the lock nut securely .
• Finish by fitting plastic covers onto bolts and nuts .
Fitting of brackets
Max . 250 kg .
More than 250 kg .