GTC Sound Innovations REVPAD Manual
62
Number
Name
Default Value
Notes
1.1
INPUT GAIN
The level of the input gain to the REVPAD.
1.2
MASTER VOLUME
Global master volume for the REVPAD outputs.
1.3
POWER-UP PRE-
SET
01A
Scroll through all of your Patches (presets) to select the Patch that will be
active when the REVPAD is turned on.
1.4
RF CHANNEL
1
The Touchpad is set to this RF channel. Do not change unless two REVPAD
units will be operating in same area or if any other device is using the same
channel. When you have changed the RF value, connect the Touchpad to the
base unit with the USB cable. Then, turn the Touchpad off and on again to
reset the unit calibration. Wait for
PAD CONNECTED
to appear in the base
unit display area before using the Touchpad.
1.5
DI_BOX
Off
Set this parameter to On or Off to globally enable or disable all the DIBOX
effect in all Patches. If it is set to Off, the DIBOX effect will not work, even if
it is used in a Patch.
1.6
OUT-R PHASE
INVERT
Off
Inverts the phase of the audio signal going to the REVPAD’s right output.
1.7
RESTORE SYSTEM No
Change to
Yes
to return to the factory system settings.
1.8
RESTORE PATCHES No
Change to Yes to return to the factory-installed Patches and erase all user-cre-
ated or modified Patches.
Summary of Contents for REVPAD
