manualshive.com logo in svg

GTC REVPAD, Manual, Page: 74 / 91

Share
Download
GTC REVPAD Manual Download Page 74

GTC Sound Innovations REVPAD Manual

68

MIDI Settings

Press the SYS button and then the right arrow button on the Navigation Roller three times to see the 

MIDI SETTINGS

 screen. Press 

the left arrow button on the Navigation Roller to see the previous screen (Touchpad Control Button Assignment). Press the right arrow 
button on the Navigation Roller to see the next screen (

MIDI IN CC Map

). Press the down arrow button on the Navigation Roller to 

view and modify the REVPAD MIDI settings.

Rotate the Navigation Roller to scroll through your options in each configuration field. Press the right arrow to continue to the next 
configuration field. Press the up arrow to return to the main System Configuration Screen.

Number

Name

Values

Notes

4.1

PC TX CHANNEL

 

■

Off

 

■

1 to 16

The MIDI channel on which the REVPAD sends program change messag-
es.

4.2

PC TX FUNCTION

 

■

Select Only

 

■

Select

See “MIDI OUT Program Change” on page 74 for more information.

4.3

RX CHANNEL

 

■

Omni

 

■

Off

 

■

1 to 16

The MIDI channel on which the REVPAD receives messages.

4.4

MIDI THRU

Off/On

When set to ON, REVPAD will forward MIDI messages received on the 
IN port to the MIDI OUT port.

Summary of Contents for REVPAD




























































































Reviews:

No comments