GTC REVPAD, Manual, Page: 43 / 91

37
Customizing your REVPAD
Modifying a Patch
You may modify Patches you have created or fine tune Patches that came with your REVPAD. First rotate the Navigation Roller (
A
)
until the Patch you want to modify appears in the editing screen.
■
To modify an existing effect, press the right arrow (
B
) until the cursor
points to the effect you want to modify. See “Creating and Editing Patches”
on page 36 for more information.
■
To add a new effect, press the right arrow (
B
) to a blank effect field. See
“Creating and Editing Patches” on page 36 for more information.
■
To insert a new effect into an existing list, press the right arrow (
B
) until
the cursor stands on the existing effect you need to move in order to make
room for a new effect. Rotate the Navigation Roller (
A
) until
Ins
appears
(
C
). It flashes three times. Continue with adding the effect. See “Creating
and Editing Patches” on page 36 for more information.
■
To delete an effect in a Patch, press the right arrow (
B
) until the cursor
stands on the existing effect you want to remove. Rotate the Navigation Roller (
A
) until
Del
appears. It flashes three times, and
the effect is removed.
When you are finished modifying the Patch, save it. See “Saving a New Patch” on page 43 for more information.
Note: You cannot add two effects of the same kind or category into a Patch.
|DIST |DELAY| |
| |DIST |DELAY|
|Ins |DELAY| |
1
P
01A: PATCH TO MODIFY
P
01A: PATCH TO MODIFY
P
01A: PATCH TO MODIFY
1
1