GTC REVPAD Manual Download Page 30

Page: 30 / 91

GTC Sound Innovations REVPAD Manual

Item

LED

Function

BATT

Indicates, by color, the battery power level:

■

Green: Good

■

Red: Needs recharging

■

Flashing Red: Battery is about to run out of power.

FREEZE

Indicates that the REVPAD is in Freeze mode.

See “Freeze Mode” on page 46 for more information.

PEDAL

Green LED indicates that the REVPAD is operating in Single mode.

See “Single Mode” on page 49

for more information.

PATCH

Indicates that the REVPAD is working in Patch Favorite mode.

See “Patch Favorite Mode” on page

47 for more information.

NORMAL

Green LED indicates that the REVPAD is operating in Normal mode.

See “Normal Mode” on page

46 for more information.

Note: Single, Patch and Normal modes cannot work simultaneously. Only one of these three LEDs can be lit at any given time.

Summary of Contents for REVPAD




























































































Search results

Summary of Contents for REVPAD

Reviews:

Related manuals for REVPAD

Brands by name

Popular brands

GTC REVPAD, Manual

Search results

Summary of Contents for REVPAD

Reviews:

Related manuals for REVPAD

Brands by name

Popular brands