GTC REVPAD, Manual, Page: 48 / 91

GTC Sound Innovations REVPAD Manual
42
In this example a wah-wah effect is added to a Patch and its range is modified for the Touchpad.
1. First rotate the Navigation Roller (
A
) until the Patch you want to
modify appears in the editing screen.
2. Insert a new effect into the existing list. See “Modifying a Patch” on
page 37 for more information.
3. Rotate the Navigation Roller (
A
) until you see
WAH
. Press the down
arrow (
B
) to enter page one of the parameter screens.
4. Keep the
MIX
parameter at 0 so that the wah-wah effect is only
active when the Touchpad is pressed.
5. Press the right arrow (
C
) to advance to the
RANGE
parameter.
Rotate the Navigation Roller (
A
) to change the range to 70.
6. Press the X-Y button (
D
). Each press changes the axis and direction
as seen in the arrow by the range value. A fifth press to the button
removes the X-Y value.
The color of the X or Y LED (
E
) under the parameter indicates:
■
X LED – red: The effect is controlled by the X+ axis.
■
X LED – green: The effect is controlled by the X- axis.
■
Y LED – red: The effect is controlled by the Y+ axis.
■
Y LED – green: The effect is controlled by the Y- axis.
7. Finish modifying the Patch and save it. See “Saving a New Patch” on page 43 for more information.
Note: Not all effect parameters have an X-Y parameter. The X-Y button (
D
) for these effects will be inactive.
SAVE SYS
X Y X Y X
|WAH |DIST |DELAY| |
|0 |100 |80 |50
|MIX |T-MIX|RANGE|LEVEL
X-Y
Y X Y
1
P
01A: PATCH TO MODIFY