GTC REVPAD, Manual, Page: 29 / 91

23
Exploring Your GTC Sound Innovations REVPAD
Item LED Function
A CLIP The LED turns red to indicate when the input gain to the REVPAD is too high. Adjust the input gain of
the signal until the LED is no longer red.
B COMM When the Touchpad is touched, the LED lights to indicate the strength of communication between the
Touchpad and the base unit.
■
Green: Good communication with the base unit.
■
Yellow: Weak communication with the base unit. (Information from the Touchpad is not fully
transmitted to the base unit.)
■
Red: Bad communication with the base unit. (Most of the information from the Touchpad does not
reach the base unit.)
A weak signal can result from the following causes:
■
The distance from the base unit is too great.
■
There is a physical barrier, such as a wall, between the REVPAD base unit and the guitar with the
Touchpad.
■
The battery in the Touchpad is weak.
■
The antenna is not connected properly.
■
There is a problem with the transmitters and/or receivers.