GTC REVPAD, Manual, Page: 44 / 91

GTC Sound Innovations REVPAD Manual
38
Setting Patch Effect Parameters
Once an effect has been added to a Patch, you may then review and adjust the parameters. Every effect includes up to eight parame-
ters. Press the down arrow when the cursor is on a selected effect to enter page one of the parameter screens (
A
). You may now edit
the effect so you will get the sound you want.
1. For example, to increase the gain from 70 to 80, press the
right arrow (
B
) three times until the cursor stands on the
GAIN
parameter (
D
). Rotate the Navigation Roller (
C
)
until the desired value appears.
2. Press the right arrow (
B
) once more to enter page two of
the parameter screens (
E
).
3. When you have finished adjusting these parameters press
the up arrow (
G
) to return to the effects screen (
G
).
4. To add a delay effect to this Patch, press the right arrow
(
B
) and rotate the Navigation Roller clockwise (
C
) until
the
DELAY
effect appears. As before, press the down arrow
(
H
) to enter the parameters screen for the delay effect.
Note: You may always press the
Home
button (
I
) to return to
the main screen of the Patch.
| 100| 100|WARM | 70
|MIX |T-MIX|TYPE |GAIN
| 100| 100|WARM | 80
|MIX |T-MIX|TONE |GAIN
| 50| 50| 50| 50
|LOW |MID |HIGH |LEVEL
SAVE SYS X-Y
X Y X Y X Y X Y
|DIST |DELAY| |
1
P
01A: EMPTY