57
Customizing your REVPAD
Auto Setup
Go to
p3
of a selected Patch editing screen to access the Auto setup parameters.
The Auto function simulates a finger movement on the REVPAD Touchpad by pressing (touring) on
the Touchpad, and without the need to move the finger at all.
When Auto mode is on, the Touchpad will respond only to touching. Finger movement on the Toch-
pad will be disabled.
1. Select a Patch for setup.
See “Modifying a Patch” on page 37 for more information.
2. Go to
p3
.
3. With
AUTO
selected press the down arrow button on the Navigation Roller.
4. See the table below for an explanation of the settings of the ADSR and LFO options.
Note: Only one of these options can be active at the same time. If LFO is chosen ADSR is disabled. Likewise, if ADSR is chosen
LFO is disabled.
ADSR Options (
A
)
Name
Value
Notes
ADSR
X, Y, XY, Z, OFF
Choose the direction the simulation will work.
MIN
0
The minimum value of the movement, where the movement begins.
MAX
0 to 100
The maximum value of the movement, where the movements ends.
Summary of Contents for REVPAD
