Chapter 7: TopDry Drying Floor
5. After the chains (G) are uniformly adjusted, crimp the “S” hooks (H) to the chutes (A).
6. Make sure when installing the “S” hook (H) to the end link on a chain (G) that the end has not been
cut open. If this is found, use the next link in chain (G).
7. The lift plate (A) must be approximately 12 in. down from the cross channel when the chutes (I) are
level (closed position).
Figure 7-20
Chute chain assembly
G
Chain – 19 ft. (TD-100232)
I
Chute
H
“S” hook (S-3383)
5
J
Excess chain
82
PNEG-4936
36 Ft. TopDry Autoflow
5.
Crimp the “S” hook after adjusting the chain.
Summary of Contents for TopDry Autoflow
