GSi TopDry Autoflow, Construction Manual

Page: 131 / 142

Chapter 11: Accessories
2. Install the assembled platform support (A) to the sidewall brace (C) and support brace (D) using
5/16 x 3/4 in. truss head screws (M) and 5/16 in. hex nuts (N).
3. Field drill sixteen 3/8 in. holes on the sidewall for each sidewall brace (C). Install the sidewall brace
(C) along with the platform support (A) to the sidewall using 5/16 x 1 in. flange bolts (L) and 5/16 in.
hex nuts (N).
4. Install the platform floor (E), platform floor splice (F) and the platform toe plates (G) to the platform
support (A) using 5/16 x 3/4 in. truss head screws (M) and 5/16 in. hex nuts (N).
5. Install the platform vertical angles (H) and handrails (I and J) on the platform support (A) using
5/16 x 3/4 in. truss head screws (M) and 5/16 in. hex nuts (N).
6. Install the handrail braces (K) to the platform vertical angles (H) and the sidewall using 5/16 x 1 in.
flange bolts (L) and 5/16 in. hex nuts (N).
Figure 11-2 Assembling the access door platform
A
Platform support (TDP-5009)
H
Platform vertical angle (LS-371)
B
Floor brace (TDP-5005)
I
59 in. handrail (TDP-5000)
C
Sidewall brace (TDP-5008)
J
30 in. handrail (TDP-5002)
D
Support brace (TDP-5007)
K
Handrail brace (TDP-5003)
E
Platform floor (TDP-5006)
L
5/16 x 1 in. flange bolt with sealing washer (S-10260)
F
Platform floor splice (TDP-5010)
M
5/16 x 3/4 in. truss head screw with sealing washer
(S-10267)
G
Platform toe plate (TDP-5011)
N
5/16 in. hex nut (S-396)
PNEG-4936 36 Ft. TopDry Autoflow 131