Smart Climate 310 rev. 03 79
0-10V OUTPUT
The Smart Climate 310 has one 0-10V output which can be used
as a supplementary output for heating, for ventilation, to control a
chimney damper or an air inlet.
The controller may also give a 10-0V signal instead of a 0-10V
signal. This may be useful for safety reasons: if the main controller
loses power and its 0-10V output drops to 0V, the controller then
gives the maximum load to the module connected on the output.
Refer to the User Setup section of this manual to enable the 0-10V
output, set the 0-10V output function or select the type of signal (0-
10V or 10-0V).
0-10V Output Settings
The operating principle of the 0-10V output is explained in the
chapters associated with the output's functions
: Cooling, Heating
or
Inlet & Chimney Damper.
Summary of Contents for Smart Climate 310
