GSi Smart Climate 310, User Manual

Page: 50 / 102

50 Smart Climate 310 rev. 03
Setting Start and Stop Temperatures for
Timers 1 & 2
Start and stop temperatures of both mist timers are directly related
to the set point. This means that when the main set point changes,
the start and stop temperatures are adjusted by the same amount.
The start temperature of the first mist timer can be adjusted from -
40°F to 40°F (-22.2°C to 22.2°C) from the set point; the stop
temperature can be adjusted from 0.5°F to 40°F (0.3°C to 22.2°C)
below its start temperature.
The start temperature of the second mist timer can be adjusted
from 0.5°F to 40°F (0.3°C to 22.2°C) above the start temperature
of the first timer; the stop temperature can be adjusted from 0.5 °F
to 40°F (0.3°C to 22.2°C) below its start temperature.
To set the start and stop temperatures for timers 1 and 2, proceed
as follows:
1. Press Mist . The start temperature of the first mist timer
is displayed.
Accessible if mist units are enabled in the USER SETUP.
2. Press Adjust then use the arrow keys to set the start
temperature of the first timer to the desired value.
3. Press Adjust again to validate.
4. Press the down-arrow key. The stop temperature of
the first timer is displayed.
5. Press Adjust then use the arrow keys to set the stop
temperature of the first timer to the desired value.
6. Press Adjust again to validate.
7. Press the down-arrow key twice. The start temperature
of the second mist timer is displayed.
8. Repeat steps 1 to 7 to set the start and stop
temperatures of the second mist timer.