GSi Smart Climate 310, User Manual

Page: 22 / 102

22 Smart Climate 310 rev. 03
Override Below:
Set the temperature below which "Low temperature override"
function starts. This temperature is directly related to the set point
which means it is automatically adjusted if the set point changes.
The override temperature ranges from 1°F to 40°F (0.6 to 22.2°C)
below the set point.
Accessible if the "Low temperature override" feature is enabled above.
Override Stops at:
Set the temperature above which temperature override functions
stop. This temperature is directly related to the set point which
means it is automatically adjusted if the set point changes.
Accessible if the "Low temperature override" feature is enabled above.
Low Temperature Override Settings:
Set the speed of the minimum ventilation fan stage; this speed
replaces the regular minimum ventilation speed when the room
temperature gets lower than the override limit. Then, set the inlet
position used during the temperature override.
Available if the "Low temperature override" feature is enabled above.
Stage Select:
Select which variable fan stage must be used to ensure minimum
ventilation cycles when the room temperature gets lower than the
override limit.
Available if the "Low temperature override" feature is enabled above.
Set point curve?:
Select Yes to use the set point curve function. This curve adjusts
the temperature set point automatically over time.
Lock Menus?:
If a password is being used, enabling this option will restrict access
to all modifiable menus except for the Current Condition, Set
Point/Curve and Minimum Speed/Curve.
User Setup and Test Mode menus are always password
protected, whether this option is enabled or not.
Program Version Number
The version number of the controller is displayed.